Printed from https://fiscalreceipts.com/program/0604286N/ — built September 26, 2026. Every figure is citation-backed; see the page online for per-number provenance.
Navy Advanced Manufacturing
Budget figures
FY2026 award data is a partial year — USAspending reports awards on a rolling basis, and this corpus runs through 2026-09-04. why partial FY2026 data? →
Budget trajectory
| Fiscal year | Amount |
|---|---|
| FY24 | $0J-book detail · PB2026 |
| FY25 | $0J-book detail · PB2026 |
| FY26 | $10.6MR-1 TOA · PB2026 |
Decade view
P-1/R-1 workbook TOA basis, shown compact in $B/$M (the workbook records USD thousands); each figure cites its own President's Budget edition
● actuals (line) · ○ enacted · ◇ request — gaps are editions the program is absent from, never interpolated.
| Series | FY26 |
|---|---|
| Request | $10.6M |
blank = series not published for this year; – = absent from that edition.
Program lineage
No predecessor/successor lineage was recorded for this program element — no FY-to-FY transfer into or out of this line was stated in the ingested J-books, and none was inferred from the program structure.
Description
Mission — (U)NAVY ADVANCED MANUFACTURING
Project 0311 - NAVAIR Advanced/Additive Manufacturing provides for the development of the Advanced/Additive Manufacturing/3D printing process, material verification and qualification to support deployment of Advanced/Additive Manufacturing (AM) capability to Fleet Depot and Level II Maintenance level facilities, as well as provides for the qualification, validation, testing and incorporation of private industry Additive Manufacturing initiatives across the Naval Aviation enterprise to include NAVSUP and DLA. Additionally, Advanced/Additive Manufacturing funds Cooperative Research and Development Activities (CRADAs) support with industry partners and next generation AM. This effort will fund the development, test, and approval of additional polymer material data curves, polymer material certification for aviation applications, and system documentation/training updates of additional high strength polymers for use on deployed AM systems. This will support deployed systems in producing critical parts for aircraft, support equipment and aircraft launch and recovery equipment, while enhancing Naval Aviation readiness and lethality allowing point of need part manufacturing to mitigate supply chain gaps, dramatically decreasing Mean Logistics Delay Times (MLDT) and increasing aircraft availability. Project 0312 - The NAVSEA Additive Manufacturing (AM) program focuses on development and use of AM equipment for Naval applications in land-based and afloat environments, including system performance requirements, shipboard integration requirements and considerations, material selection, design optimization, equipment and component certification, and digital engineering integration. Efforts also include consideration of AM across a wide variety of potential applications ensuring additively manufactured components can meet mission requirements and that system/component technical requirements are updated to leverage AM. Project 0313 - NAVWAR Digital Integration Advanced Manufacturing The NAVWAR Digital Advanced Manufacturing Ecosystem (DAME) project provides Navy Advanced Manufacturing (AdvM) technology aligning to Chief of Naval operations (CNO) priorities to deliver revolutionary capabilities to improve fleet readiness. Project 0314 - In accordance with the National Defense Strategy (NDS), A Design for Maintaining Maritime Superiority 2.0, and Navy Facility Command (NAVFAC) Strategic Design 2.0, this program provides the Navy with new capabilities to enable resilient and agile logistics thru advanced manufacturing (AdvM). Investing in AdvM enhances the fleet's ability to conduct operational logistics in a contested environment and ensures logistics supportability across the austere distributed battlespace. AdvM technology results in increased operational availability, on demand production of critical systems, and supply chain cost savings. This effort will identify critical parts suitable for AdvM production in the field; identify AdvM systems appropriate to produce and certify critical parts in the field; analyze and identify AdvM system implications across doctrine, organization, training, materiel, leadership and education, personnel, facilities and policy (DOTMLPF-P); conduct end-user training, field experimentation, and fleet exercise technology insertion to validate AdvM system capability and systems integration issues.
Mission — NAVAIR Aviation Advanced Manufacturing
Advanced/Additive Manufacturing (AM) - Transfer to BA 4, PE: 0604286N Navy Advanced/Advanced Manufacturing PROJ 0311 NAVAIR Aviation Advanced Manufacturing starting in FY 2026 from PE: 0605013N Information Technology Development Project 2903 NAVAIR IT. Provides for the development of the Advanced/Additive Manufacturing/3D printing process, material verification and qualification to support deployment of Advanced/Additive Manufacturing (AM) capability to Fleet Depot and Level II Maintenance level facilities, as well as provides for the qualification, validation, testing and incorporation of private industry Additive Manufacturing initiatives across the Naval Aviation enterprise to include NAVSUP and Defense Logistics Agency (DLA). Additionally, Advanced/Additive Manufacturing funds Cooperative Research and Development Activities (CRADAs) support with industry partners and next generation AM. This effort will fund the development, test, and approval of additional polymer material data curves, polymer material certification for aviation applications, and system documentation/training updates of additional high strength polymers for use on deployed AM systems. This will support deployed systems in producing critical parts for aircraft, support equipment and aircraft launch and recovery equipment, while enhancing Naval Aviation readiness and lethality allowing point of need part manufacturing to mitigate supply chain gaps, dramatically decreasing Mean Logistics Delay Times (MLDT) and increasing aircraft availability.
Mission — NAVSEA Maritime Advanced Manufacturing
The AM program focuses on development and use of AM equipment for Naval applications in land-based and afloat applications, including system performance requirements, shipboard integration requirements and considerations, material selection, design optimization, equipment and component certification, and digital engineering integration. Efforts also include consideration of AM across a wide variety of potential applications ensuring AM manufactured components can meet mission requirements and that system/component technical requirements are updated to leverage AM.
Mission — NAVWAR Digital Integration Advanced Manufacturing
The NAVWAR Digital Integration Advanced Manufacturing project provides Navy Advanced Manufacturing (AdvM) technology aligns to Chief of Naval operations (CNO) priorities to deliver revolutionary capabilities to improve fleet readiness. These enterprise solutions will provide the foundation to (a) enhance warfighter capability by implementing disruptive AdvM technologies such as Additive Manufacturing (AM), Subtractive Manufacturing, 3D CNC milling, Computer Numerical Control (CNC) Lathing, and Robotic welding; (b) increase readiness through low-volume production of hard-to-source items; and (c) improve warfighting capacity by enabling low volume custom production at or near the point of need. Specific efforts include the development of the Digital Advanced Manufacturing Ecosystem (DAME) to address the design and certification of AM capabilities for both afloat and ashore, development of Cyber Security Risk Management Profiles for devices and applications on operational networks, definition of a secure Technical Data Package to describe components that can be digitally manufactured, and the development of an overarching, enterprise-level Digital Manufacturing Thread (device management, digital rights management, licensing, configuration management, data storage rule/access and application programming interfaces).
Mission — NAVFAC Expeditionary Advanced Manufacturing
Advanced Manufacturing (AdvM) : In accordance with the National Defense Strategy (NDS), A Design for Maintaining Maritime Superiority 2.0, and Navy Facility Command (NAVFAC) Strategic Design 2.0, this program provides the Navy with new capabilities to enable resilient and agile logistics thru advanced manufacturing (AdvM). Investing in AdvM enhances the fleet's ability to conduct operational logistics in a contested environment and ensures logistics supportability across the austere distributed battlespace. AdvM technology results in increased operational availability, on demand production of critical systems, and supply chain cost savings. This effort will identify critical parts suitable for AdvM production in the field; identify AdvM systems appropriate to produce and certify critical parts in the field; analyze and identify AdvM system implications across doctrine, organization, training, materiel, leadership and education, personnel, facilities and policy (DOTMLPF-P); conduct end-user training, field experimentation, and fleet exercise technology insertion to validate AdvM system capability and systems integration issues.
Justification
Accomplishments & Planned Programs (1)
NAVSEA Maritime Advanced Manufacturing
This effort funds the development of additive manufacturing technologies, advanced coating techniques, design and topology optimization, materials selection, characterization and process development.
Budget line items(workbook-cited)
P-1/R-1 workbook Total Obligation Authority basis (USD thousands) · PB2026.
Exhibit R-1
| Account | Org | Type | Amount |
|---|---|---|---|
| Research, Development, Test and Evaluation, Navy | N | FY26 Disc. Request | $10.6M |
| Research, Development, Test and Evaluation, Navy | N | FY26 Total | $10.6M |
Budget Details(R-2/P-40 facts)
J-book detail basis (R-2/P-40, USD millions) · PB2026 — a different accounting basis from the P-1/R-1 workbook TOA above; where the two disagree, the reconciliation strip under Budget figures shows both.
Wider than this screen — swipe the table sideways for the remaining fiscal-year columns.
| Project | All Prior Years | FY24 Actuals | FY25 Total | FY26 Base | FY26 Request |
|---|---|---|---|---|---|
| Program Element | $0 | $0 | $0 | $10.6M | $10.6M |
| 0311: NAVAIR Aviation Advanced Manufacturing | $0 | $0 | $0 | $2.37M | $2.37M |
| 0312: NAVSEA Maritime Advanced Manufacturing | $0 | $0 | $0 | $5.19M | $5.19M |
| 0313: NAVWAR Digital Integration Advanced Manufacturing | $0 | $0 | $0 | $2.50M | $2.50M |
| 0314: NAVFAC Expeditionary Advanced Manufacturing | $0 | $0 | $0 | $531.0K | $531.0K |
Follow the dollar
No follow-the-dollar view — this program's awards haven't been crosswalked at high confidence (flows cover 312 of 1,938 programs). why coverage is partial? →
Awards
No awards are linked to this program element at high or medium confidence — the budget→award crosswalk only asserts links it can defend, and this line has none yet.
Lobbying mentions
No Senate LDA lobbying filing in the tracked data mentions this program element by code or alias.
Oversight
Department-level designation (not specific to this program)
GAO lists 5 high-risk areas for DOD as a whole. That designation covers the department, not Navy Advanced Manufacturing. No program-specific GAO finding for this line is in the ingested data. See the DOD oversight record.
Program dossier
No research dossier for this program — dossiers cover 50 of 1,938 programs, the largest fully J-book-detailed lines by FY2026 requested dollars. why no dossier here? →
Primary sources
Open any budget figure for its exact receipt. Verified line items lead with the highlighted government PDF; original spreadsheets download with their budget edition and exhibit in the filename.
Budget totals · TOA sources
FY2026 Department of Defense Budget: RDT&E Programs (R-1) · comptroller.war.gov
Exhibit R-1 · P326
Complete workbook · unchanged saved copy. Saves as PB2026_DoD_R-1_Research-Development-Test-Evaluation.xlsx.
Detailed budget justification
The related TOA spreadsheets above use a different accounting basis from R-2/P-40 detail. Their amounts are not assumed to match these detailed sources.
RDTEN BA1-3 Book · www.secnav.navy.mil